Work on the topic and do the tasks
Before you read the passage, talk about these questions.
1 What are some tools used when working on
electronics?
2 What tools can be used for cutting wires?
Read the advice column. Then, choose the correct answers.
1 What is the purpose of the response?
A to explain how to use a magnifier
B to describe different types of wrenches
C to list tools needed to repair electronics
D to explain the importance of hammers
2 According to the passage, which item is used in a different profession?
A diagonal cutter
B wire stripper
C hex wrench
D hemostat
3 What tool is used with slotted screws?
A torque wrench
B flathead screwdriver
C hammer
D Phillips screwdriver
Mr. Tech's weekly advice column
Question: I want to start repairing electronics. What sort of tools do I need to get started?
Dear Reader,
Start by buying a Phillips screwdriver and needlenose pliers. These are two of the most basic tools. Phillips screws are most common in electronics. However, sometimes you'll see slotted ones. In this case, you'll need a flathead screwdriver. Another useful tool is a hammer. For electrical work, diagonal cutters are important. You will also need a wire stripper and electrical tape. A medical hemostat is also helpful to hold your wires.After these basics, look into different types of wrenches. I suggest a hex wrench and a torque wrench. Also, a magnifier is helpful for detailed work.
Match the words (1-8) with the definitions (A-H).
1 _ hemostat
2 _ hammer
3 _ wire stripper
4 _ torque wrench
5 _ electrical tape
6 _ hex wrench
7 _ Phillips screwdriver
8 _ needlenose pliers
A a tool with a heavy metal head used for pounding or striking
B an L-shaped tool used for loosening or tightening screws and bolts with a head shaped like a hexagon
C a clamping tool used to clamp and hold wires
D small pliers with thin long jaws used for cutting and gripping in detailed work.
E a tool that uses a gauge to tighten nuts and bolts
F a tool used to cut and remove insulation from a wire
G tape made of plastic or vinyl used to insulate electrical wires
H a tool used to drive Phill ips screws
Read the sentence and choose the correct word.
1 Jenna used her Phillips screwdriver / flathead screwdriver for slotted screws.
2 . Henry used his hex wrench / diagonal cutters to cut the wires at an angle.
3 The magnifier / hemostat is very helpful for looking at details.